| Xiangzhe Weng | Sliding shear behaviour of horizontal grouted joints in prefabricated concrete walls: review of the literature and current design models |
| Eric C Wang | Testing and validating existing deep learning models to determine first-motion p-wave polarities for Australian earthquakes |
| Bethany Eaton | Neotectonic fault model and synthetic earthquake catalogue for the Snowy Monaro Region, New South Wales |
| Scott Menegon | Validation of the Qubit 360 low-damage plasterboard wall system via component, system and building level experimental programs |
| Martin Kusz | Dynamic Design of Suspended Services |
| Jasin Long | Mind the Gap: A Review of Non-Structural Element Seismic Clearance Requirements |
| Nuttaphon Boonsuriyapan | Seismic performance of high-rise steel storage rack in cross-aisle direction |
| Stuart N R Orchard | Site-Specific Seismic Hazard Assessment for Honiara, Soloman Islands |
| Julia Muscella | Updated Procedures for MLa Estimation for Australian Earthquakes |
| Olivia Rose Kulesza | A hop, skip and a jump: palaeoseismic studies of Kangaroo Island, South Australia |
| Israporn Sethanant | Uncovering the Short-term Earthquake Potential of the Para fault in Adelaide CBD |
| Dan Sandiford | Aftershock sequence of the 2023 ML 5.0 Apollo Bay Earthquake |
| Lauren Vinnell | Influences of comparative risk and recent severe weather experience on earthquake preparation in a lower seismic hazard zone |
| James La Greca | Mapping Neotectonic Fault Sources in the Gippsland Region for Seismic Hazard Applications |
| Jeff Bayless | Are ground motions in Australia different between cratonic and non-cratonic regions, and different from global models? |
| Gideon Tang | Probabilistic Fault Displacement Hazard Analysis for Primary and Distributed Surface Ruptures in Australia |
| Deelaka Jayaweerarathne | Engineering the rocking isolation of buildings with tendon restraints for maximising efficiency |
| Hyerin Lee | Experimental Study on the Seismic Behaviour of Corroded Reinforced Concrete Beam-Column Joints |
| Ryan Hoult | To bond, or not to bond, that is the question: the role of reinforcement debonding in enhancing the performance of RC walls |
| Scott Menegon | Development and experimental testing of a novel three-dimensional prefabricated core wall system |
| Ryo Kuwabara | Canadian Design Practice Review for Developing an Experimental Program on Seismic Performance of Precast Walls |
| Frank Büker | Nonlinear Cyclic Behaviour of North American Precast Concrete Wall Buildings |
| Vic Dent | A preliminary report on the distribution of seismicity near Wyalkatchem, W.A, July 2024 to April 2025 |
| Trevor Allen | Draft Hazard-Design Factor (Z) Maps and Elastic Design Spectrum for the 2025 Amendment to the AS1170.4:2024 |
| Gonzalo Munoz | Overview of Newly Released Seismic Retrofit Guidelines for Reinforced Concrete Buildings in New Zealand |
| Ayoub Riman | Seismic Strengthening of Bridge Abutment Wall by Ground Anchors |
| Mahdi Rad | Seismic Retrofit of Reinforced Concrete Frame Buildings Using Displacement-Based Approach with Alternative Steel Bracing Systems |
| Lisa Tobber | Seismic Design and Performance of Precast Walls in Canada |
| Ryan Hoult | Assessing Torsional Demands and Residual Drift in RC Core Walls under Earthquake Excitation |
| Prashidha Khatiwada | Evaluating Code-Based and Site-Specific Response Spectra for Far-Field Megathrust Earthquakes: A Case Study for Malaysia |
| Arash Nazari Rad | Seismic Restraint of MEPF Components: Aligning AS 1170.4:2024 with Global Best Practices |
| Jordan Bartlett | Assessment and seismic retrofit of non-structural elements in existing buildings |
| Sam (Mehdi) Hemmat | Numerical Analysis and Simulation-Based Model Development of Wire Bracing Systems for Non-Structural Applications |
| Adam Pascale | Analysis of the Wyalkatchem Aftershock Sequence using the Double-Difference Location Method |
| Ambica Sharma | Paleoseismic Investigations of Neotectonic Faults in Eyre Peninsula: Implications for Seismic Hazard |
| Hashim Al Musawi | Subsurface Characterisation of the Para Fault Beneath Adelaide Using Borehole Stratigraphy and Geological Data Integration |
| Ashkan Hashemi | Friction-Based Bracing Systems for Low-Damage and Economic Design of High-Importance Structures in Australia |
| Thuany Costa de Lima | Improving Ground Motion Analysis in Papua New Guinea Using Raspberry Shake Instruments |
| Reza Ebrahimi | Development of a Seismic Site Classification Database for Western Australia Using the WA Array Network |
